OZKKM CRUX is a 5-axis monoblock bridge saw machine that, thanks to the advanced functionality, allows every stone fabrication shop to be equipped with accurate and quick machines, without giving up quality. The standard versions of CRUX is monoblock, i.e.: mounted on a monolithic structure of steel carpentry that assures utmost rigidity and stability levels, with no need of any concrete foundation. For this reason, if necessary, they can be easily moved elsewhere. The monoblock configuration can be exploited also for using these machines as “building“ equipment, i.e. it can be placed time by time near the factory where the coating, flooring, etc. are being performed.
OZKKM CRUX is the result of the most advanced designing on computer and the massive use of FEM analysis in order to reach a very high rigidity level of the bridge and structures. Even though it is a sawing machine, both have technical solutions of a CNC machine. All the movements of the axes are on linear bearings which do not need to be adjusted. All the lubrication points have been gathered in areas which can easily be seen and reached, without disassembling guards or protections for facilitating ordinary maintenance. High level components are employed. The motors used are servo motors with precision reducers. Especially the high speed of the X axis allows to cut down idle times as much as possible with a productivity increase (the percentage of the time that the disc stays on the material is higher with respect to the time forplacing or returning to cut start).
The spindle, anchored in front of the beam to offer the utmost rigidity, can accommodate disks up to a diameter of 625 mm and ½” gas thread tools. It also warrants the choice of placing the cutting disc in axis with the head rotation center to reduce the efforts on the axis to zero for an excellent cutting quality. The inclination of the disc can be arranged automatically from 0° to 90° and the possibility to interpolate the X and Y axes make the machine suitable for repetitive processing and single details even with vertical, inclined, parallel, orthogonal, diagonal and curved cuts. The machines, in the standard version are equipped with a fixed table and can be tilted up to 80 ° by a hydraulic piston to facilitate the loading and unloading of the processed pieces.
| Disc Motor Power | : 21,5 kW (S6) |
| Motor Speed | : Maks. 6000 devir (with Invertor) |
| Min. Disc Diameter | : Ø350 mm |
| Max. Disc Diameter | : Ø725 mm |
| Spindle Cone | : ½ Gas Thread, Intercooling |
| Disc Inclination | : 0- 90° Automatic |
| Max. Working Length | : 3800 mm |
| Max. Working Width | : 2400 mm (with option 2700 mm) |
| Z Axis Stroke | : 400 mm |
| Max. Working Thickness | : 240 mm |
| Water Consumption | : 50 l/dk |
| Air Consumption | : 20 l/dk |
| Standard Voltage | : 400 V / 50 Hz |
| Total Power Consumption | : ~29 kW |
| Max. Disc Diameter with Suction Cups | : Ø500 mm |
| Machine Length | : 6200 mm |
| Machine Height | : 3200 mm |
| Machine Width | : 4000 mm ( with option) |
| Machine Weight | : ~6500 kg |
OZKKM CRUX is a 5-axis monoblock bridge saw machine that, thanks to the advanced functionality, allows every stone fabrication shop to be equipped with accurate and quick machines, without giving up quality. The standard versions of CRUX is monoblock, i.e.: mounted on a monolithic structure of steel carpentry that assures utmost rigidity and stability levels, with no need of any concrete foundation. For this reason, if necessary, they can be easily moved elsewhere. The monoblock configuration can be exploited also for using these machines as “building“ equipment, i.e. it can be placed time by time near the factory where the coating, flooring, etc. are being performed.
OZKKM CRUX is the result of the most advanced designing on computer and the massive use of FEM analysis in order to reach a very high rigidity level of the bridge and structures. Even though it is a sawing machine, both have technical solutions of a CNC machine. All the movements of the axes are on linear bearings which do not need to be adjusted. All the lubrication points have been gathered in areas which can easily be seen and reached, without disassembling guards or protections for facilitating ordinary maintenance. High level components are employed. The motors used are servo motors with precision reducers. Especially the high speed of the X axis allows to cut down idle times as much as possible with a productivity increase (the percentage of the time that the disc stays on the material is higher with respect to the time forplacing or returning to cut start).
The spindle, anchored in front of the beam to offer the utmost rigidity, can accommodate disks up to a diameter of 625 mm and ½” gas thread tools. It also warrants the choice of placing the cutting disc in axis with the head rotation center to reduce the efforts on the axis to zero for an excellent cutting quality. The inclination of the disc can be arranged automatically from 0° to 90° and the possibility to interpolate the X and Y axes make the machine suitable for repetitive processing and single details even with vertical, inclined, parallel, orthogonal, diagonal and curved cuts. The machines, in the standard version are equipped with a fixed table and can be tilted up to 80 ° by a hydraulic piston to facilitate the loading and unloading of the processed pieces.
